3d printer air filter - Up Plus2

update Updated: 11/15/2018

Zimpure - Up Plus2 instructions build


update This suction head is waiting for validation and we can't guarantee that it will fit well to your machine for the moment. If you have tested it, we are waiting for your feedbacks and photos to confirm the compatibility.



  • Step 1. Print the adapters


    For the Up Plus2, you will need to print these files, already oriented as needed. Here are a few recommendations for printing: 

    File Material Layer Height Supports Infill Download
    STLUPHoseHolder.STL ABS 0.1 YES HIGH
    file_download
    STLUPSuctionHead.STL ABS 0.1 YES HIGH
    file_download

    Creative Commons License
    This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.


    This is your last print without Zimpure!

  • Step 2. Installing the Up Plus2 Suction Head

    First, install the Up Plus2 suction head that you downloaded above on your extruder.

  • Step 3. Installing the Hose

    Then, insert the hose into the Plus2 Suction Head and plug the other side of the hose into Zimpure. 

  • Step 4. Operating Instruction

    Here you go, your Zimpure is ready to filter! First, depending on the cooling fan you’re using, you could have to lower it to have a suction rate efficient enough.

    Please note that you need to turn your Zimpure ON only after than your Plus2 has started to print. Please verify how the beginning of the first layer goes. You are now all set up to print safely, without any toxic emissions. Happy safe printing!