update Updated: 11/15/2018

Zimpure - M3D Micro instructions build

• Step 1. Print the adapters
  
  
  

  For the M3D Micro, you will need to download your suction head on Thingiverse here. 
  

  
  This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

  
  
  

  This is your last print without Zimpure!

• Step 2.Installing the M3D Micro Suction Head

  First, install the M3D Micro suction head that you downloaded above on your extruder.

  

  
• Step 3. Installing the Hose

  Then, insert the hose into the Micro Suction Head and plug the other side of the hose into Zimpure. 

• Step 4. Operating Instruction

  Here you go, your Zimpure is ready to filter! First, depending on the cooling fan you’re using, you could have to lower it to have a suction rate efficient enough.
  
  Please note that you need to turn your Zimpure ON only after than your Micro has started to print. Please verify how the beginning of the first layer goes. You are now all set up to print safely, without any toxic emissions. Happy safe printing!