update Updated: 12/27/2018

Zimpure - CReality3D Ender 3 instructions build

• Step 1. Print the adapters
  
  
  

  For the CReality3D Ender 3, you will need to print these files, already oriented as needed. Here are a few recommendations for printing: 

  File	Material	Layer Height	Supports	Infill	Download
  STLTornadoCR10_Zimpure_suction_head.stl	ABS	0.1	YES	HIGH	file_download
  STLTornadoCR10_Zimpure_cooling_blower_ycl1Xiw.STL	ABS	0.1	YES	HIGH	file_download
  STLTornadoCR10_Zimpure_HeatFan.STL	ABS	0.1	YES	HIGH	file_download

  
  
  This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

  
  
  

  This is your last print without Zimpure!

• Step 2.Removing the steel cover of the extruder

  In order to make a perfect setup for hoovering a maximum of nanoparticles and COVs, we choose to remove the original steel extruder cover (See picture below). The blower air guide we’ve redesigned will also improve the filament cooling a lot.

  
• Step 3.Installing the 3 new 3D printed parts

  As you can see on the rendering below, we’ve designed 3 new parts you need to 3D print. One suction head where you plug Zimpure’s hose in, one air guide for the filament blower, and one air guide for the heat sink cooling fan.

  
• Step 4.Operating instruction (IMPORTANT)